I'll start this off by saying that I'm making this tutorial because I work with these types of consoles and I re-sell them for a few people that I know and I used to sell them local and know very much about one. I actually have one at my house just sitting down; well let’s get started on this tutorial.
Slim:
You might be asking what is this. It's basically a certain type of Xbox they used to beta-test games and to make games on and to launch betas on it and some betas that are private are development kit only. This kit in the picture is special as it's a Crystal Development XDK which is a Slim that was pre-made before the final casing and software which was a test unit.
Phat:
You might also be asking what is this. It's another type of Xbox they used to beta-test games but this is the Phat older version
Q&A.
Q) How much is the Phat XDK?
A) $400-$1,200
Q) How much is the Slim XDK?
A) $800-$1,700
Signs of your kit dying out:
Here are some signs that will let you know if you’re about to get red rings of death or something bad.
Recovery:
A recovery is basically special development software that keeps updating and getting leaked during dashboard updates.
Download Link = Here
21076.6 is the latest recovery out so far.
How to capture 720P video from the Dev.?
Connect your Dev. with an Ethernet from the Dev. to the Router and then type this in.
Launch: Xbox 360 Command Prompt
Enter : xbmovie /X:123 /F:111 yourvideo.wmv
Replace 123 by YOUR IP (dev. kit IP)
Replace 111, by the quality you choose:
F1: HD 8mbps 720p30; 384Kbps 5.1 surround
F2: HD 8Mbps 720p30; 192Kbps stereo
F3: SD 1395Kbps 360p30; 96Kbps stereo
F4: Stream high: 542Kbps 180p30; 64Kbps stereo
F5: stream low: 42Kbps 136p15; 16Kbps moni
F6: HD 15Mbps 720p60; 384Kbps 5.1 surround
EXAMPLE : xbmovie /X:192.168.1.83 /F:1 trailer1.wmv
The Xbox 360 Command Prompt can be found when you fully installed the SDK.
Where to purchase one?
PM me for the website if you want as I don't want to advertise.
I hope you liked this tutorial as it's the first one to be made about an Xbox 360 Development Kit
Slim:
You might be asking what is this. It's basically a certain type of Xbox they used to beta-test games and to make games on and to launch betas on it and some betas that are private are development kit only. This kit in the picture is special as it's a Crystal Development XDK which is a Slim that was pre-made before the final casing and software which was a test unit.
Phat:
You might also be asking what is this. It's another type of Xbox they used to beta-test games but this is the Phat older version
Q&A.
Q) How much is the Phat XDK?
A) $400-$1,200
Q) How much is the Slim XDK?
A) $800-$1,700
Signs of your kit dying out:
Here are some signs that will let you know if you’re about to get red rings of death or something bad.
Recovery:
A recovery is basically special development software that keeps updating and getting leaked during dashboard updates.
Download Link = Here
21076.6 is the latest recovery out so far.
How to capture 720P video from the Dev.?
Connect your Dev. with an Ethernet from the Dev. to the Router and then type this in.
Launch: Xbox 360 Command Prompt
Enter : xbmovie /X:123 /F:111 yourvideo.wmv
Replace 123 by YOUR IP (dev. kit IP)
Replace 111, by the quality you choose:
F1: HD 8mbps 720p30; 384Kbps 5.1 surround
F2: HD 8Mbps 720p30; 192Kbps stereo
F3: SD 1395Kbps 360p30; 96Kbps stereo
F4: Stream high: 542Kbps 180p30; 64Kbps stereo
F5: stream low: 42Kbps 136p15; 16Kbps moni
F6: HD 15Mbps 720p60; 384Kbps 5.1 surround
EXAMPLE : xbmovie /X:192.168.1.83 /F:1 trailer1.wmv
The Xbox 360 Command Prompt can be found when you fully installed the SDK.
Where to purchase one?
PM me for the website if you want as I don't want to advertise.
I hope you liked this tutorial as it's the first one to be made about an Xbox 360 Development Kit