The "Gamecube Vape Mod" looks like this
Now, you're gonna need to be a little creative on how to make it look like a real gamecube, meaning you need controller wires if you want it to connect like that. I'm making this soon for some friends to have 4 way vape sessions when we're high.
First, you need the Gamecube. Get a broken one on eBay for around $10. Don't bother getting a functional one because you're gonna fuck it up. Get it and hollow the inside. Then you can pop open the tray and it'll just be empty.
Also, cut any wiring, there should be somewhere in the back for a power cable. You're gonna use that later.
You're gonna need passthrough batteries so that they never die. You can get one with a disposable tank for $7/piece on fasttech. You can get a new tank on mtbakervapor for $2 so it shouldn't cost much to maintain, even if you use it daily. It even looks like the one in the pic uses the same batteries.
Because you'll be using it so much, you will probably need a lot of liquid for 4 people. You can get VERY cheap liquid at a link below in the thread and I heard it's very good quality but I'm yet to test it. An alternative route would simply be to make your own. This information can be found on the internet.
Next, since you have 4 passthrough batteries running, you need a PSU. I recommend purchasing on Amazon. I'd recommend one like the one linked below because it has 7 slots for whatever reason and a power supply that can connect to a wall. I've used 2 passthroughs through a cheap USB hub connected to a PC at a friend's so this should work fine.
That's all the supplies you need to get it running really. As for the controllers to make it look real, I'd buy broken controllers or anything that utilizes the USB port, and drill a hole through it and glue it onto a point in the cable. Then, drill a USB sized hole in the middle of the controller point in the console and slide the USB through, then your "controller" should connect fine.
That about wraps up the tut. Feel free to get creative with the tanks you use, whether you want different colors like the pic, or nicer vapor, you have room to do anything here and it's fun to chill with friends and have unlimited vaping.
Gamecube:
http://www.ebay.com/sch/i.html?_kw=broken+gamecube+consoles+parts
Battery w/tank:
http://www.fasttech.com/products/0/10004592/1372202-variable-voltage-usb-passthrough
Liquid:
http://www.hiliq.com/
USB Hub:
http://www.amazon.com/USB-Highspeed...=UTF8&qid=1405912318&sr=8-12&keywords=usb+hub
Cheap Tank:
http://www.mtbakervapor.com/accessories/iclear-16-dual-coil-clearomizer/
Replacement Coils for Tank:
http://www.mtbakervapor.com/accessories/iclear-16-replacement-coil/
Now, you're gonna need to be a little creative on how to make it look like a real gamecube, meaning you need controller wires if you want it to connect like that. I'm making this soon for some friends to have 4 way vape sessions when we're high.
First, you need the Gamecube. Get a broken one on eBay for around $10. Don't bother getting a functional one because you're gonna fuck it up. Get it and hollow the inside. Then you can pop open the tray and it'll just be empty.
Also, cut any wiring, there should be somewhere in the back for a power cable. You're gonna use that later.
You're gonna need passthrough batteries so that they never die. You can get one with a disposable tank for $7/piece on fasttech. You can get a new tank on mtbakervapor for $2 so it shouldn't cost much to maintain, even if you use it daily. It even looks like the one in the pic uses the same batteries.
Because you'll be using it so much, you will probably need a lot of liquid for 4 people. You can get VERY cheap liquid at a link below in the thread and I heard it's very good quality but I'm yet to test it. An alternative route would simply be to make your own. This information can be found on the internet.
Next, since you have 4 passthrough batteries running, you need a PSU. I recommend purchasing on Amazon. I'd recommend one like the one linked below because it has 7 slots for whatever reason and a power supply that can connect to a wall. I've used 2 passthroughs through a cheap USB hub connected to a PC at a friend's so this should work fine.
That's all the supplies you need to get it running really. As for the controllers to make it look real, I'd buy broken controllers or anything that utilizes the USB port, and drill a hole through it and glue it onto a point in the cable. Then, drill a USB sized hole in the middle of the controller point in the console and slide the USB through, then your "controller" should connect fine.
That about wraps up the tut. Feel free to get creative with the tanks you use, whether you want different colors like the pic, or nicer vapor, you have room to do anything here and it's fun to chill with friends and have unlimited vaping.
Gamecube:
http://www.ebay.com/sch/i.html?_kw=broken+gamecube+consoles+parts
Battery w/tank:
http://www.fasttech.com/products/0/10004592/1372202-variable-voltage-usb-passthrough
Liquid:
http://www.hiliq.com/
USB Hub:
http://www.amazon.com/USB-Highspeed...=UTF8&qid=1405912318&sr=8-12&keywords=usb+hub
Cheap Tank:
http://www.mtbakervapor.com/accessories/iclear-16-dual-coil-clearomizer/
Replacement Coils for Tank:
http://www.mtbakervapor.com/accessories/iclear-16-replacement-coil/
