~Contents~
- How to make an account -
- Your ControlPanel Settings -
- Programs you need and how to use them -
- Setting up your VPS -
- Downloading and running RSBot and more -
- Extra Info -
- FAQ -
~How to make an account~
Ok, so first we are going to be making an account! Head to http://www.elastichosts.com/ and select 'Free cloud hosting trial'.
Now, before we fill in our information, to make multiple accounts the best thing to do is to go to http://www.hidemyass.com and make a throwaway email account
This is so you can make multiple servers without going through all the shit of signing up to hotmail etc.
Just make any old email and select the expiry to whatever you want
Ok now go back to your form on Elastichosts and fill it in using the email you just created. Make sure you enter a valid phone number to receive your password. You will not get charged for the text. If you are from the UK make sure to put +44 before your number, I'm not sure about the US and other country's though. If you get a message saying they have ran out of trial accounts, just change your zone/server in the 4th section.
You will now recieve a text, and a few minutes later, an email. Make sure to note both parts down and put them in order or which it says. (Sometimes it only sends you an email for some reason).
Mine was Email as the first part, and then text, put these together and this will be your password.
It will follow the lines of (this is just random numbers I pressed
); 8fW1h7Ui
Now scroll down the Elastichosts page, and there will be a section 'Account use' under that will be 'ControlPanel' Click that.
It will then ask for your email and password. Insert your email+text put together into the password box, and then enter your throwaway email in the email box.
~Your ControlPanel Settings~
This is a very easy part
Once logged in your screen will look like this;
Delete the pre-made server, copy the settings on the picture, and click 'add'
You will get a box with your server, and a box with your drive. Under the drive it will say imaging, wait until this is finished (keep clicking refesh), and then click edit on your server (not the drive).
You will now get a screen like the following; among the settings will be your 'VNC3' password, change this to whatever you want and hit configure, and then start.
It should then take you back to your control panel. Minimize this page as you need it later.
~Programs you need and how to use them~
Now we need to download a piece of software called tightvnc. We use this to control and connect to our VPS through our pc. If you cannot find the download link, here is a direct one. Scan it with whatever you want, its not even my program.
Go throught the install wizard until its finished installing, open it up and it will look something like this;
You don't need to mess with any settings.
~Setting up your VPS~
Ok. Now remember that page of your control panel? Open that back up and copy the IP adress into the bar on TightVNC. And then click connect. A box will come up asking for your password. Type in your VNC3 Password you changed a while back.
Once you have done it will come up with some nerdy command prompt thing
(You can close your elastichosts page now, the TightVNC will save the IP address, so you only need to remember your password, if you can, you will never have to open that control panel again.
Now I will talk you through what you have to type, otherwise it will take far too long
Ok first type 'root', then type 'passwd' to set a password, you need this to access ubuntu. When you type your password, nothing will come up, click enter, it will as you to retype, again nothing will come up, click enter and it has been set. Then enter: "sudo apt-get update" Then follow this up with 'sudo apt-get install ubuntu-desktop'. It will go through some code, and then say 'Continue Y/N' press 'y' and then enter. Now wait for this install (may take a while).
Ok now start your very own server! Type in 'sudo /etc/init.d/gdm start' The server will now start and ask you for a username and password, type in root, and then the password you set earlier (passwd).
You will then get the Ubuntu Linux Desktop!
Now to install Powerbot/Nexus.
If you can't find Java SE Binary, then we're gonna have to download it! Goto Applications -> Ubuntu Software Center -> Get Software -> Developer Tools -> Java -> OpenJDK Java Runtime -> Install, it will then start installing, once done exit that.
Now Right click on your client and open it with Java SE Binary, it will now open!
If it STILL doesn't open (gay VPS), then your gonna have to enable permissions
This is really easy, all you have to do is right click the .jar and select Properties -> Permissions and tick the box 'Allow executing files as programs'
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.:In-depth guide on how to install the Nexus client:.
this part is for you noobs
love, Nemesis
(no homo)
1) Provided that you have installed JDK, and have not ignored the step, you can now dl the nexus bot.
Navigate your browser to Autofighter.org, rsbots.net, or some other impsoft vendor, and download the client. As of 4/11, their servers should be back up so you don't have to worry about them not letting you download.
2) Extract the files to desktop or documents with the shitty ubuntu extractor
3) Right click the Install-mac-linux.sh file -> properties -> permissions -> check the box that says "allow execution as program"
4) As you probably have guessed, you will need to use install-mac-linux.sh to install the bot.
5) Once you're done, double click run.linux.sh and everything from there on should be the same as what you're used to. Enter your auth and have fun botting.
6) The server problem seems to have been fixed (current as of 4/11), and the bot should load worlds like normal.
Please note, I didn't write this guide, this method has been spread trough the whole internet, so I don't know who to give credits to.
- How to make an account -
- Your ControlPanel Settings -
- Programs you need and how to use them -
- Setting up your VPS -
- Downloading and running RSBot and more -
- Extra Info -
- FAQ -
~How to make an account~
Ok, so first we are going to be making an account! Head to http://www.elastichosts.com/ and select 'Free cloud hosting trial'.
Now, before we fill in our information, to make multiple accounts the best thing to do is to go to http://www.hidemyass.com and make a throwaway email account
Just make any old email and select the expiry to whatever you want
Ok now go back to your form on Elastichosts and fill it in using the email you just created. Make sure you enter a valid phone number to receive your password. You will not get charged for the text. If you are from the UK make sure to put +44 before your number, I'm not sure about the US and other country's though. If you get a message saying they have ran out of trial accounts, just change your zone/server in the 4th section.
You will now recieve a text, and a few minutes later, an email. Make sure to note both parts down and put them in order or which it says. (Sometimes it only sends you an email for some reason).
Mine was Email as the first part, and then text, put these together and this will be your password.
It will follow the lines of (this is just random numbers I pressed
Now scroll down the Elastichosts page, and there will be a section 'Account use' under that will be 'ControlPanel' Click that.
It will then ask for your email and password. Insert your email+text put together into the password box, and then enter your throwaway email in the email box.
~Your ControlPanel Settings~
This is a very easy part
Delete the pre-made server, copy the settings on the picture, and click 'add'
You will get a box with your server, and a box with your drive. Under the drive it will say imaging, wait until this is finished (keep clicking refesh), and then click edit on your server (not the drive).
You will now get a screen like the following; among the settings will be your 'VNC3' password, change this to whatever you want and hit configure, and then start.
It should then take you back to your control panel. Minimize this page as you need it later.
~Programs you need and how to use them~
Now we need to download a piece of software called tightvnc. We use this to control and connect to our VPS through our pc. If you cannot find the download link, here is a direct one. Scan it with whatever you want, its not even my program.
Go throught the install wizard until its finished installing, open it up and it will look something like this;
You don't need to mess with any settings.
~Setting up your VPS~
Ok. Now remember that page of your control panel? Open that back up and copy the IP adress into the bar on TightVNC. And then click connect. A box will come up asking for your password. Type in your VNC3 Password you changed a while back.
Once you have done it will come up with some nerdy command prompt thing
Now I will talk you through what you have to type, otherwise it will take far too long
Ok first type 'root', then type 'passwd' to set a password, you need this to access ubuntu. When you type your password, nothing will come up, click enter, it will as you to retype, again nothing will come up, click enter and it has been set. Then enter: "sudo apt-get update" Then follow this up with 'sudo apt-get install ubuntu-desktop'. It will go through some code, and then say 'Continue Y/N' press 'y' and then enter. Now wait for this install (may take a while).
Ok now start your very own server! Type in 'sudo /etc/init.d/gdm start' The server will now start and ask you for a username and password, type in root, and then the password you set earlier (passwd).
You will then get the Ubuntu Linux Desktop!
Now to install Powerbot/Nexus.
If you can't find Java SE Binary, then we're gonna have to download it! Goto Applications -> Ubuntu Software Center -> Get Software -> Developer Tools -> Java -> OpenJDK Java Runtime -> Install, it will then start installing, once done exit that.
Now Right click on your client and open it with Java SE Binary, it will now open!
If it STILL doesn't open (gay VPS), then your gonna have to enable permissions
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.:In-depth guide on how to install the Nexus client:.
this part is for you noobs
love, Nemesis
(no homo)1) Provided that you have installed JDK, and have not ignored the step, you can now dl the nexus bot.
Navigate your browser to Autofighter.org, rsbots.net, or some other impsoft vendor, and download the client. As of 4/11, their servers should be back up so you don't have to worry about them not letting you download.
2) Extract the files to desktop or documents with the shitty ubuntu extractor
3) Right click the Install-mac-linux.sh file -> properties -> permissions -> check the box that says "allow execution as program"
4) As you probably have guessed, you will need to use install-mac-linux.sh to install the bot.
5) Once you're done, double click run.linux.sh and everything from there on should be the same as what you're used to. Enter your auth and have fun botting.
6) The server problem seems to have been fixed (current as of 4/11), and the bot should load worlds like normal.
Please note, I didn't write this guide, this method has been spread trough the whole internet, so I don't know who to give credits to.
50 GB Hard Drive Space
